Fault self-repair strategy based on evolvable hardware and reparation balance technology

In the face of harsh natural environment applications such as earth-orbiting and deep space satellites, underwater sea vehicles, strong electromagnetic interference and temperature stress,the circuits faults appear easily. Circuit faults will inevitably lead to serious losses of availability or impeded mission success without self-repair over the mission duration. Traditional fault-repair methods based on redundant fault-tolerant technique are straightforward to implement, yet their area, power and weight cost can be excessive. Moreover they utilize all plug-in or component level circuits to realize redundant backup, such that their applicability is limited. Hence, a novel selfrepair technology based on evolvable hardware（EHW） and reparation balance technology（RBT） is proposed. Its cost is low, and fault self-repair of various circuits and devices can be realized through dynamic configuration. Making full use of the fault signals, correcting circuit can be found through EHW technique to realize the balance and compensation of the fault output-signals. In this paper, the self-repair model was analyzed which based on EHW and RBT technique, the specific self-repair strategy was studied, the corresponding self-repair circuit fault system was designed, and the typical faults were simulated and analyzed which combined with the actual electronic devices. Simulation results demonstrated that the proposed fault self-repair strategy was feasible. Compared to traditional techniques, fault self-repair based on EHW consumes fewer hardware resources, and the scope of fault self-repair was expanded significantly.     

航空发动机全飞行包线稳态划分方法研究

航空发动机在鲁棒控制器设计过程中存在飞行包线区域难以系统划分的问题,为此,提出基于推力耗油率特性和基于动压耗油率特性的航空发动机飞行包线划分法。根据某型涡扇发动机在全包线范围内稳态工作时的推力、耗油率及动压特性,结合大气条件的客观规律,通过两种划分方法将飞行包线划分为65 个区域,用每个区域对应标称点的参数代替其周围小偏差区域和边界点参数。通过对该发动机全包线内各区域标称点与边界点参数的对比,证明两种方法均对全飞行包线划分有效,可为后续航空发动机控制器设计提供理论基础。     

具有方向特性的X角点的亚像素检测定位

X角点被广泛应用于相机标定与可见光视觉跟踪系统,不仅具有位置信息,还可以具有方向信息.针对X角点的精确位置检测和方向检测,提出了一种利用X角点对称性的检测与定位算法——对称性计算算子(SC,Symmetry Calculation),简称SC算子.该算法主要由两部分组成.先利用对称性计算值确定X角点像素位置,然后基于二次曲线拟合及直线相交求亚像素位置.通过角点定位实验,仿真分析高斯噪声和畸变对定位精度及鲁棒性的影响,并与Harris算法及Micron Tracker系统进行比较.实验表明,本文方法能有效检测X角点,排除其他类型的角点和干扰点,具有较高的定位精度和鲁棒性.      

重力梯度对自由漂浮空间机器人姿态扰动分析

分析重力梯度对在轨运行的自由漂浮空间机器人姿态运动影响。由Lagrange方法建立自由漂浮空间机器人受重力梯度扰动的非线性动力学模型。首先,考虑无控关节自由状态,分析重力梯度对关节运动的影响。其次,利用相平面轨迹分析重力梯度对自由漂浮系统姿态运动影响。最后,由速度偏差曲线分析重力梯度对机械臂的影响。结果表明,当作用时间接近轨道周期或更长时,重力梯度引起的关节偏差已十分显著,且这种扰动作用主要由轨道偏心率决定;关节锁定时俯仰姿态受扰运动有周期振动与翻滚两种形式,若初始角速度满足一定限值可以保证俯仰运动不发生翻滚;当机械臂长时间工作时,忽略重力梯度将产生明显的末端定位误差。     

航空高强度碳纤维单向层合结构复合材料在切削过程中的各向异性行为研究

单向层合结构的高强度碳纤维增强树脂基复合材料已逐渐发展成为航空承力结构件的主要材料,相关的切削加工需求也越来越多。由于显著的各向异性,单向层合结构的碳纤维复合材料易在切削加工中形成缺陷,难切削加工性明显。采用直角自由切削试验的方法,得到了T700航空高强度碳纤维单向层合结构复合材料在不同纤维方向角下的切削力、切削比能、切削温度、切削加工表面。基于试验结果讨论了碳纤维单向层合材料在切削过程中力热行为的各向异性,得到了不同切削参数条件下的切削比能图谱以及碳纤维复合材料的切削热源和传导模型。通过扫描电子显微镜(Scanning electron microscope,SEM)分析了典型切削加工表面的特征,得到了不同纤维方向下的表面形成规律。     

Influence of lunar topography on simulated surface temperature

The surface temperature of the Moon is one of the essential parameters for the lunar exploration, especially to evaluate the Moon thermophysical features. The distribution of the temperature is heavily influenced by the Moon topography, which, however, is rarely studied in the state-of-art surface temperature models. Therefore, this paper takes the Moon topography into account to improve the surface temperature model, Racca model. The main parameters, such as slopes along the longitude and latitude directions, are estimated with the topography data from Chang’E-1 satellite and the Horn algorithm. Then the effective solar illumination model is then constructed with the slopes and the relative position to the subsolar point. Finally, the temperature distribution over the Moon surface is obtained with the effective illumination model and the improved Racca model. The results indicate that the distribution of the temperature is very sensitive to the fluctuation of the Moon surface. The change of the surface temperature is up to 150 K in some places compared to the result without considering the topography. In addition, the variation of the surface temperature increases with the distance from the subsolar point and the elevation, along both latitude and longitude directions. Furthermore, the simulated surface temperature coincides well with the brightness temperature in 37 GHz observed by the microwave sounder onboard Chang’E-2 satellite. The corresponded emissivity map not only eliminates the influence of the topography, but also hints the inherent properties of the lunar regolith just below the surface. Last but not the least, the distribution of the permanently shadowed regions (PSRs) in the lunar pole area is also evaluated with the simulated surface temperature result.     

基于下降图像三维地形重建的参数自适应生成

针对基于单应性下降图像着陆区三维地形重建算法中重建参数对重建结果的影响,提出一种参数自适应生成算法计算最优重建参数.首先,根据匹配特征点对应的空间点拟合出地形近似平面,作为系列平行虚拟切分平面的参考平面,从而确定切分平面的法向和基本深度.其次,在地形近似平面两侧,分别计算特征点对对应的空间点到地形拟合平面最大距离,用于估计重建区地形高度差异.最后,根据地形高度差异和相机距地形拟合平面距离,寻找最优切分平面个数.根据这些重建参数即可计算地形重建所需单应矩阵.对比不同重建参数下的重建结果表明该参数设定方法可以达到更优重建效果.      

同轴撞击气-气喷嘴数值模拟和实验

为进一步深入研究喷嘴结构参数对气-气掺混燃烧特性的影响,针对氢向氧斜喷带撞击角度的气-气喷嘴开展了实验和数值模拟.实验研究了撞击角度对燃烧效率和燃烧室壁面温度的影响,数值仿真分析了撞击角度对喷注面板和氧喷嘴管壁温的影响.结果表明:随着氢向氧撞击角度的增大,推进剂燃烧效率、燃烧室壁面和氧喷嘴出口管壁面热载降低;氢向氧撞击角度的引入,增大了喷注面板热载.      

无人机全空域飞行影响因素分析

进入全空域飞行是未来无人机发展的必然趋势,所面临的关键问题是安全性和空中交通管理.根据无人机大、中、小型,低、中、高速并存的特点,分析了无人机安全性和影响其全空域飞行能力的关键因素与改进方法,包括建立分类管理机制,提高自主导航与控制能力,进行动态任务规划,采取协调机制,增强环境感知与规避能力等.进一步提出了无人机空域飞行的建模/仿真理论框架,目标是在提高无人机可靠性的基础上,使其具备全空域飞行能力,从而降低无人机使用成本、提高空域共享能力,实现有人机、无人机共享空域.      

基于速度增量的空间绳系机器人中距离逼近过程最优轨迹规划

针对空间绳系机器人中距离逼近过程最优轨迹规划问题,提出了基于速度增量的多目标逼近轨迹优化方法,优化指标为总速度增量及逼近时间。首先建立逼近过程相对动力学模型及最优逼近轨迹优化模型,然后利用改进型非劣分类遗传算法得到相对逼近距离1.5 km内逼近轨迹的Pareto最优解。仿真结果表明,该方法可以揭示空间绳系机器人逼近距离1.5 km内逼近时间、燃料消耗、相对目标的面内视界角及速度增量次数之间的相互关系,能满足针对不同任务需求提供相应最优轨迹的要求。